Cleaning the Cabinet and Exterior Surfaces

Warning: Do not use alcohol (methyl, ethyl, or isopropyl) or any strong dissolvent. Do not use thinner or benzene, abrasive cleaners (powders), abrasive cleaning materials (scrub brush, scouring pad), or compressed air. Do not use any other type of cleaners such as vinegar, solvents, degreasers, or ammonia-based cleaners. These can damage the unit.

Warning: Do not soak the kiosk and its devices with cleaning liquid. Do not spray cleaners or other solutions directly onto the kiosk. Avoid getting any liquid inside the kiosk or its components. If liquid does get inside, have a qualified technician check the kiosk before powering it on.

1.Turn the kiosk OFF and unplug the External AC Power Cable.

2.Wipe the cabinet, camera lens, bar code scanner window, passport scan window, fingerprint reader scan area, and other exterior surfaces using any of the following:

•A soft and non-abrasive cleaning cloth or cloth towel, dampened with mild non-abrasive soap and water solution

•Food Grade Disinfectant wipes

3.Wipe the kiosk using a clean and dry lint-free cloth.